HYBRISOL I HYBRIDIZATION SOLUTION 500ML

Non disponible en dehors du Royaume-Uni et de l'Irlande

Application

All

Before using, preheat at 37°C to 45°C for 10 - 20 minutes to dissolve precipitants and mix thoroughly. Use 1 ml for every 15 cm2 membrane for prehybridization and hybridization. Prehybridize for 60 minutes at 42°C to 45°C. Hybridize overnight at 45°C to 52°C. Prehybridization and hybridization temperatures may have to be determined empirically. Refer to the Nomograph located under the "Protocols" link at S4040 product specific page at www.chemicon.com for hybridization temperatures with various stringencies guidelines.

Disclaimer

Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.

General description

Hybrisol^® Hybridization Solutions are pre-made, ready-to-use solutions optimized for sensitive single and multiple gene copy detection using membrane-based hybridization techniques. They are designed to give maximum signal and clean background for hybridizations performed on nylon and nitrocellulose membranes. Hybrisol™ Solution contains 10% Dextran Sulfate, 1% SDS, 50% Formamide, 6X SSC, Sheared DNA, and Modified Denhardt′s Solution.

Legal Information

CHEMICON is a registered trademark of Merck KGaA, Darmstadt, Germany

HYBRISOL is a registered trademark of Merck KGaA, Darmstadt, Germany

Physical form

Liquid Hybrisol I ™ Solution contains 10% Dextran Sulfate, 1% SDS, 50% Formamide, 6X SSC, Sheared DNA, and Modified

Denhardt′s Solution.

Storage and Stability

Store at room temperature tightly sealed when not in use. Solution can be stored refrigerated however it should be warmed to at least room temperature prior to use dilution for best results. Precipitates may form when the solution is cooled.