Mini rotator LabRoller, entrée CA 230 V, FICHE Schuko

Non disponible en dehors du Royaume-Uni et de l'Irlande

General description

Simple, yet versatile, the Mini LabRoller Rotator is designed for mixing samples in both a horizontal and vertical plane. The Mini LabRoller Rotator is supplied with a rotisserie for 36 x 1.5 or 2.0 mL tubes. Two additional rotisseries are available separately. Compact design conserves valuable bench Simple construction allows for easy cleaning and decontamination Wide selection of motions from gentle rolling, tumbling, to end over end mixing Cold room and incubator compatible Three easily interchangeable rotisseries to hold various size tubes and plates Operating conditions: +4 °C - 65 °C, up to 85% RRH non-condensingWhen a rotisserie is inserted horizontally (tubes held vertically), an end over end motion is produced. The unit can then be used for simple rotating, or rested on either end to create a tumbling motion. Placing the Mini LabRoller on the end with the power switch will create a more vigorous tumbling motion than resting it on the opposite end.A rocking motion is achieved by simply inserting pegs to limit the movement of the rotisserie to 20°, 45°, or 60°. Any of the three available rotisseries can be used as a rocking platform.Using the supplied rod, the rotisseries may be mounted vertically (tubes held horizontally). In all configurations, the speed of the rotisserie is fixed at 24 rpm.

Legal Information

Mini LabRoller is a trademark of Labnet Intl., Inc.